1080p CGI Commands

The Features Menu

The PTZ Overlay

param.cgi?cmd=getmotorattr

FunctionGet Pan&Tilt Settings
Authorityadmin
Parameter
  • panspeed: fast (0) - slow (2)
  • tiltspeed: fast (0) - slow (2)
  • panscan: [1-50] - Number of hscans
  • tiltscan: [1-50] - Number of vscans
  • movehome: [on, off] - Go to Center or Postion [initpresetindex] after Restart
  • ptzalarmmask: [on, off] - Deactivate Motion Detection during Pan&Tilt
  • selfdet: De/Activate Calibration (Required for Preset Postions and PTZ Tour)
  • alarmpresetindex: [1-8]; - Alarmposition
  • initpresetindex: [1-8]; - Position Camera goes to after Restart
Example
  • GET: http://admin:instar@192.168.178.88/param.cgi?cmd=getmotorattr
  • GET: http://192.168.178.88/param.cgi?cmd=getmotorattr&-usr=admin&-pwd=instar
  • SET: http://admin:instar@192.168.178.88/param.cgi?cmd=setmotorattr&-selfdet=on&-movehome=off&-ptzalarmmask=on&-tiltspeed=0&-panspeed=0&-tiltscan=50&-panscan=50&-value=0&-alarmpresetindex=3

param.cgi?cmd=getmdalarm&-aname=preset

FunctionGet State of Alarm Position
Authorityadmin
Parameter
  • md_preset_switch: Go to [alarmpresetindex] (Alarm Position) at Alarm Event - [on, off]
Example
  • GET: http://admin:instar@192.168.178.88/param.cgi?cmd=getmdalarm&-aname=preset
  • GET: http://192.168.178.88/param.cgi?cmd=getmdalarm&-aname=preset&-usr=admin&-pwd=instar
  • SET: http://admin:instar@192.168.178.88/param.cgi?cmd=setmdalarm&-aname=preset&-switch=on

param.cgi?cmd=gettimerpreset

FunctionGet Park Position Parameter
Authorityadmin
Parameter
  • timerpreset_enable: De/Activate Park Position - [0, 1]
  • timerpreset_index: Select Park Position - [1 - 8]
  • timerpreset_interval: Time before going back to Park Position in seconds - [30 - 900]
Example
  • GET: http://admin:instar@192.168.178.88/param.cgi?cmd=gettimerpreset
  • GET: http://192.168.178.88/param.cgi?cmd=gettimerpreset&-usr=admin&-pwd=instar
  • SET: http://admin:instar@192.168.178.88/param.cgi?cmd=settimerpreset&-timerpreset_enable=1&-timerpreset_index=1&-timerpreset_interval=600

param.cgi?cmd=get_instar_admin&-index=46

FunctionOne-Step Pan&Tilt Control
Authorityadmin
Parameter
  • admin_value46: De/Activate One-Step Pan&Tilt Control - [0, 1]
Example
  • GET: http://admin:instar@192.168.178.88/param.cgi?cmd=get_instar_admin&-index=46
  • GET: http://192.168.178.88/param.cgi?cmd=get_instar_admin&-index=46&-usr=admin&-pwd=instar
  • SET: http://admin:instar@192.168.178.88/param.cgi?cmd=set_instar_admin&-index=46&-value=0

Verwandte Themen:

Mehr