1080p CGI Commands

The Multimedia Menu

The Image Overlay

param.cgi?cmd=getimageattr

FunctionGet Image Parameter
Authorityadmin
Parameter
  • display_mode: Current 0: black and white mode 1: color mode
  • brightness: brightness [0-100]
  • saturation: saturation [0-255]
  • sharpness: sharpness [0-100]
  • contrast: contrast [0-100]
  • hue: hue: [0-255]
  • wdr: Software Wide Dynamic Range Mode: [on, off]
  • night: Night mode 0 (inactive), 1 (active)
  • shutter: Shutter Speed [0 - 65535]
  • flip: flip: Flip the Image [on, off]
  • mirror: Mirror the Image [on, off]
  • gc: Night illumination, value Range 0=auto, [1-255]=maual
  • ae: Minimum exposure, range 0-65535
  • targety: Exposure [0-255]
  • noise: Low light denoising intensity (0-100)
  • gamma: Gamma 0-3
  • aemode: Auto-Exposure mode, the range [0-2]
    • 0 Automatic
    • 1 Indoor
    • 2 Outdoor
  • imgmode: Image priority mode
    • 0: Frame rate priority
    • 1: Illumination priority
Example
  • GET: http://admin:instar@192.168.178.88/param.cgi?cmd=getimageattr
  • GET: http://192.168.178.88/param.cgi?cmd=getimageattr&-usr=admin&-pwd=instar
  • SET: http://admin:instar@192.168.178.88/param.cgi?cmd=setimageattr&-brightness=4&-saturation=3&-contrast=4&-flip=off&-mirror=off&-shutter=1120&-sharpness=4

param.cgi?cmd=getvideoattr

FunctionGet the Video Attributes
Authorityadmin
Parameter
  • videomode: 41: Resolution CH11=1080p, CH12=320p, CH13=160p
  • vinorm: P: 50Hz(PAL) | N: 60Hz(NTSC)
  • wdrmode: Hardware Wide Dynamic Range: 0 (off), 1 (active)
  • profile: h.264 encoder 0: baseline, 1: mainprofile
  • maxchn: Maximum active video channels
Example
  • GET: http://admin:instar@192.168.178.88/param.cgi?cmd=getvideoattr
  • GET: http://192.168.178.88/param.cgi?cmd=getvideoattr&-usr=admin&-pwd=instar
  • SET: http://admin:instar@192.168.178.88/param.cgi?cmd=setvideoattr&-videomode=41&-vinorm=P&-wdrmode=1&-profile=1&-maxchn=3

param.cgi?cmd=getimageattrex

FunctionGet Extended Image Attributes
Authorityadmin
Parameter
  • display_mode: Current 0 (Black&White), 1 (Colour Mode)
  • wdrauto: Hardware Wide Dynamic Range 0 (Auto), 1 (Manual)
  • wdrautval: Auto WDR Strength [0-2]
  • wdrmanval: Manual WDR Strength [0-255]
  • d3noauto: 3D Noise Reduction Mode: 0 (auto), 1 (manual)
  • d3noval: 3D Noise Reduction Strength: [0-255]
  • gcauto: Signal Gain: 0 (auto), 1 (manual)
  • gcval: Gain Multiplier: [0-255]
  • aemodeex: Exposure Mode
    • Highlight (Exposure) priority
    • Lowlight (Framerate) priority
  • aelowval: Lowlight Intensity [0-255]
  • aehighval: Highlight Intensity [0-255]
  • aeratio: Length Exposure Ratio [0-100]
Example
  • GET: http://admin:instar@192.168.178.88/param.cgi?cmd=getimageattrex
  • GET: http://192.168.178.88/param.cgi?cmd=getimageattrex&-usr=admin&-pwd=instar
  • SET: http://admin:instar@192.168.178.88/param.cgi?cmd=setimageattrex&-wdrauto=0&-wdrautval=2&-d3noauto=1&-d3noval=120

param.cgi?cmd=getldcattr

FunctionGet Lens Distortion Correction
Authorityadmin
Parameter
  • ldc_enable: Image Distortion Correction: 0 (disabled), 1 (enabled)
  • ldc_xoffset: Horizontal Image Offset
  • ldc_yoffset: Vertical Image Offset
  • ldc_ratio: Distortion Correction [0-511]
Example
  • GET: http://admin:instar@192.168.178.88/param.cgi?cmd=getldcattr
  • GET: http://192.168.178.88/param.cgi?cmd=getldcattr&-usr=admin&-pwd=instar
  • SET: http://admin:instar@192.168.178.88/param.cgi?cmd=setldcattr&-ldc_enable=1&-ldc_xoffset=0&-ldc_yoffset=0&-ldc_ratio=399

Verwandte Themen:

Mehr