IN-Route P52

Firewall

Portweiterleitung

Überblick

In diesem und den folgenden Artikeln werden wir uns die Weboberfläche (WebUI) des IN-Route P52 einmal genauer ansehen. Um die Oberfläche zu erreichen, laden Sie zuerst die Batterie Ihres IN_Route´s auf, schieben Sie den Power Knopf in die WiFi Position und verbinden Sie sich mit dem WLAN Netzwerkes des Gerätes. Für mehr Informationen folgen Sie bitte der Anleitung für das Router Login. Um diesem Artikel folgen zu können, aktivieren Sie bitte die Expertenansicht - die Einfache Ansicht wird nicht alle Funktionen zur Verfügung stellen, die im Folgenden besprochen werden. Beachten Sie bitte, dass die folgenden Informationen erweiterte Funktionen des IN-Route P52 betreffen, die für den regulären Einsatz nicht geändert werden müssen. In den meisten fällen wird es reichen den Ersten Schritten zu folgen.


Sie möchten Ihre IP Kamera mit dem IN-Route verbinden und die Kamera dann außerhalb des Netzwerks erreichen? Richten Sie einfach eine Portweiterleitungsregel und greifen Sie auf die Kamera über die WAN-Adresse Ihres Routers zu.


Die Portweiterleitung can be used to make a device inside the IN-Route´s WiFi network accessible from the outer network. For example, you have an INSTAR IP camera connected to the IN-Route´s WiFi network. The IN-Route is set to build a bridge to your main router. Now you want to access the camera from your laptop that is connected to the main router. To solve this problem, first set up a port forwarding rule of the camera´s http port to the camera´s IP address inside the IN-Route network. Then check the IN-Route´s WAN IP address and type it into your web browser on your laptop. In case your camera´s web port (that you had to use for the port forwarding earlier) is not the default 80 you have to add it the WAN IP address. E.g. the routers WAN IP address is 192.168.1.14 and the camera port is 8081, the address that you have to use to access your camera becomes http://192.168.1.14:8081.

Virtual Server


The Virtual Server function allows you to open a port on the WAN side and direct it to the same or a different port on the inside LAN. You can use this function to forward a port to access a device on the LAN via the IN-Route´s WAN IP address.


The Virtual Server settings allow you to define independent external and internal ports to access your local webserver from an external network. For example: Use this setting if your webserver uses an internal port that you are not allowed to use in outer network.


Example:
The IN-Route P52 is connected with your main router and you are using your INSTAR IP camera inside the device´s wireless network. You want to activate the port forwarding to access the camera with mobile device´s 3G network.


Find out the camera´s IP address (the address is displayed in the address bar on your web browser when you accessed the camera´s user interface - e.g. 192.168.169.2) and type it into the IP Address field. Connect to the camera via your web browser and find out the LAN (http) port under Network / IP Configuration. Type in the cameras LAN port as Internal Port. Choose an available port for the External Port - e.g. 8080. The protocol has to be set to TCP.

Now configure your main router to forward the above choose external port to the IP address your IN-Route device has inside the main routers network.

You are now able to access your camera from anywhere by typing it´s DDNS Address in a web browsers address bar or using it as the host address in your mobile app. The DDNS address can be found under Network / DDNS in your cameras web user interface (please add the external port to the DDNS address separated by a “:”) - e.g. xxxx88.ddns-instar.de:8080.

Port Forwarding


The Port Forwarding function, unlike the Virtual Server allows you to open a port range to the wide area network.


Configure your router to open a door for a local service behind a single LAN port or port range. Every remote request will automatically be redirected to the local server. For example if you are using a webserver (e.g. an IP camera) connected to your IN-Route P52 and want clients to be able to connect to the server from outside your local network.

Simply enable the forwarding, type in the local IP address of the device you want to be accessible for the outside, type in the port or port range you want to open for the device and define the protocol (in most cases just TCP).


Example:
The IN-Route P52 is directly connected to your DSL modem and you are using your INSTAR IP camera inside the device´s wireless network. Now simply type the IN-Routes WAN IP Address into your computer´s (that is not part of the IN-Route´s WiFi network) web browser to be connected to your camera. If you don´t want to check the IN-Route´s WAN IP every time before you are able to enter - check out the IN-Route´s DDNS function.


Find out the camera´s IP address (the address is displayed in the address bar on your web browser when you accessed the camera´s user interface - e.g. 192.168.169.2) and type it into the “IP Address” field. Connect to the camera via your web browser and find out the LAN (http) port under Network / IP Configuration. Type in the LAN port into both fields of the port range. The protocol has to be set to TCP.

You are now able to access your camera from anywhere by typing it´s DDNS Address in a web browsers address bar or using it as the host address in your mobile app. The DDNS address can be found under Network / DDNS in your cameras web user interface - e.g. xxxx88.ddns-instar.de:80.

Verwandte Themen:

Mehr